Large Bore Connecting Rod Simulations

Kirjoittajat

  • Jussi Göös
  • Anton Leppänen
  • Antti Mäntylä
  • Tero Frondelius Wärtsilä
DOI: https://doi.org/10.23998/rm.64658

Avainsanat:

Connecting Rod, Medium Speed Engine, FEM, MBS, Abaqus, Excite PU, Wärtsilä

Abstrakti

On combustion engine a connecting rod converts the reciprocating motion of a piston to the rotating motion of a crankshaft. Simulation of a large bore connection rod has been performed in Abaqus Standard, using boundary conditions from AVL EXCITE Power Unit. By using the latest simulation technologies and the well known boundary conditions, simulated stresses correspond very well with the measured ones from a running engine. 

Numero
Vol 50 Nro 3 (2017)
Osasto
Artikkelit

Julkaistu

2017-08-21

Viittaaminen

Göös, J., Leppänen, A., Mäntylä, A., & Frondelius, T. (2017). Large Bore Connecting Rod Simulations. Rakenteiden Mekaniikka, 50(3), 275–278. https://doi.org/10.23998/rm.64658

Copyright (c) 2017 Jussi Göös, Anton Leppänen, Antti Mäntylä, Tero Frondelius

Creative Commons License

Tämä työ on lisensoitu Creative Commons Nimeä-JaaSamoin 4.0 Kansainvälinen Julkinen-lisenssillä.