Natural Frequency Calculations with JuliaFEM

Författare

  • Marja Rapo
  • Jukka Aho
  • Tero Frondelius Wärtsilä

DOI:

https://doi.org/10.23998/rm.65040

Nyckelord:

Natural frequency analysis, JuliaFEM, Finite Element Method

Abstract

This article presents a simple natural frequency analysis performed with JuliaFEM - an open-source finite element method program. The results are compared with the analysis results pruduced with a commercial software. The comparison shows that the calculation results between the two programs do not differ significantly.

Nedladdningar

Publicerad

2017-08-21

Nummer

Vol 50 Nr 3 (2017)

Sektion

Artikkelit

Licens

Copyright (c) 2017 Marja Rapo, Jukka Aho, Tero Frondelius

Creative Commons-licens

Det här verket är licensierat under en Creative Commons Erkännande-DelaLika 4.0 Internationell-licens.

Referera så här

Rapo, M., Aho, J., & Frondelius, T. (2017). Natural Frequency Calculations with JuliaFEM. Rakenteiden Mekaniikka, 50(3), 300-303. https://doi.org/10.23998/rm.65040