Natural Frequency Calculations with JuliaFEM

Kirjoittajat

  • Marja Rapo
  • Jukka Aho
  • Tero Frondelius Wärtsilä

Avainsanat:

Natural frequency analysis, JuliaFEM, Finite Element Method

Abstrakti

This article presents a simple natural frequency analysis performed with JuliaFEM - an open-source finite element method program. The results are compared with the analysis results pruduced with a commercial software. The comparison shows that the calculation results between the two programs do not differ significantly.

Osasto
Artikkelit

Julkaistu

2017-08-21

Viittaaminen

Rapo, M., Aho, J., & Frondelius, T. (2017). Natural Frequency Calculations with JuliaFEM. Rakenteiden Mekaniikka, 50(3), 300–303. https://doi.org/10.23998/rm.65040